1. Go to Start menu --> Settings --> System
2. Select External GPS icon
3. On the Software port tab: select COM2
4. Then on the Hardware port tab: select COM4 and Baud: 9600
In Explorer 7:
5. Go to Settings > GNSS tab Port: COM3 Baud: 9600
6. If you are intend to use RTCM correction go to the Settings > NTRIP tab and set Port: COM4 and Baud: 9600
7. Finally select the proper script from the /Scripts/CHC folder in the installation directory on the Settings > Command tab > Command File button and then you can connect to the GNSS receiver on the GPS > Status panel.
Available scripts for LT 400 HS:
LT400HS-GLONASS.txt
LT400HS-NTRIP.txt
LT400HS-SBAS.txt
GNSS & NTRIP port settings on CHC LT400 HS
- Balazs Hober
- Site Admin
- Posts: 260
- Joined: Fri Aug 08, 2008 12:53 am
- Location: Hungary, Budapest
- Contact:
Return to “Setting up devices”
Who is online
Users browsing this forum: No registered users and 1 guest