Page 1 of 1

GNSS & NTRIP port settings on CHC LT400 HS

Posted: Wed Jul 03, 2013 11:18 am
by Balazs Hober
1. Go to Start menu --> Settings --> System
2. Select External GPS icon
3. On the Software port tab: select COM2
4. Then on the Hardware port tab: select COM4 and Baud: 9600

In Explorer 7:
5. Go to Settings > GNSS tab Port: COM3 Baud: 9600
6. If you are intend to use RTCM correction go to the Settings > NTRIP tab and set Port: COM4 and Baud: 9600

7. Finally select the proper script from the /Scripts/CHC folder in the installation directory on the Settings > Command tab > Command File button and then you can connect to the GNSS receiver on the GPS > Status panel.

Available scripts for LT 400 HS: