Resetting of Height/Altitude data and Date

If you want to know:
- how to customize an attribute table
- how could you create pick lists and use it with code dictionaries
- how to work with the default values and rules
... how to use the smart capabilities of the software in the above issues.

Please don't panic! You are in the right place, just send us over your questions.
User avatar
Posts: 1
Joined: Mon Jul 25, 2011 1:38 pm

Resetting of Height/Altitude data and Date

Postby Tomroworth » Mon Jul 25, 2011 1:54 pm


I’m having a problem with height data in Digiterra. I’ve captured a series of points with height data (Altitude) of drainage assets. When I go to edit other data attributes such as depths, sizes, etc it resets the height data to 0.00 and resets to the current date from the original date the points were captured even when both the height and date are set to “Read Only”.

Is there a way to avoid this from occurring and to be able to edit attribute data without resetting the height in the field and back in office.

Thanks in advance.

User avatar
Posts: 91
Joined: Sat Aug 29, 2009 10:41 am
Location: Budapest, Hungary

Re: Resetting of Height/Altitude data and Date

Postby peterm » Tue Jul 26, 2011 12:39 pm

Hello Tomroworth,

if you set edit the point's it, means that the coordinates of the points is changed. (Also the Height data).
If you set the 'Read only' it means, that all data come from the measurements, and you can not modify them.
Set the Height field rule to NONE. It will solve the problem.

Return to “Working with attributes”

Who is online

Users browsing this forum: No registered users and 0 guests